36 Search Results for "sydney harbour"
CNCKing.com does not provide tech support for cutting or putting this project together, use the videos below as a guide. Assembly instructions are NOT provided with digital file downloads, as they are part of the CNC Design Anthology. All these...
I've documented across almost a dozen blog posts my conversion of the original Sydney Harbour Bridge I made a few years back from a laser cutting project into a CNC table router friendly project... it was quite a task but...
Well, everything was going smooth until what seems totally logical didn't work with my ShopBot Desktop. The ShopBot tried to keep going along the cutting path even though it wasn't part of my Patworks board (see the picture above, left...
This is the final step towards getting my laser cut Sydney Harbour Bridge ready for my ShopBot Desktop. This is the first time I tool path a design that will need to be indexed because my cutting surface is only...
The preview of the cutting looks good but there is one major problem – I'll be cutting out the drill holes first, followed by the inside parts but what about the outside parts? How will they stay on the board...
Partworks, which came with my ShopBot Desktop that I've made lots of videos with here on CNCKing.com, is a great program for getting the Sydney Harbour Bridge model files ready for CNC table routing. Unlike a laser, the table router...
Just to recap the design process I'm sharing here on CNCKing.com, the 3D modeling of the Sydney Harbour Bridge CNC model is done it's initial editing from 6 mm to 4 mm so that I could make it larger for...
Yeah, it has taken several hours now but we are almost done the first part of converting the file from CNC laser to CNC router friendly here on CNCKing.com! Now we see a big problem that wasn't apparent previously –...
Continuing on the file conversion here on CNCKing.com... As I design all my models based on material thickness, these kind of thickness issues will reek havoc on the final design if I don't catch all of them. Although I work...
This was originally designed for a laser to be cut using 6mm thick material but I wanted to make this CNC table routable, the simplest way to do this version for me is to bring the material thickness down to...